Bench top multichannel analyzer, programmable for the simultaneous quantitative analysis of the elements present in ferrous and non-ferrous alloys. The system is suitable for covering the entire spectral range from 170 up to 700 nm. The detection system is an high resolution CCD (Charge Coupled Device} system with 2048 elements.
Low cost portable spectrometer for ferrous and non-ferrous applications. Due to its small dimensions it can easily provide Grade Identification of alloys, Positive Material Identification and Sorting (Pass/Fail). The optical system used, CCDs (Charge coupled Devices), assure to ESA PORT the right flexibility for analysis of different matrices.
Universal Lapping machine for ferrous and non-ferrous samples preparation. A complete set of optional accessories allows for blocking of pieces with different dimensions and irregular shapes. SP 3000 can be laboratory installed, is easy to use and is equipped with all safety features in accordance with EC standards.
Electrogrinding machines for metal sample preparation. DS 300 will allow you to prepare, in few seconds, the sample surface to be analysed. The double disc version is the ideal one when you need to rough-turn the sample or to avoid contamination between differing alloys.
Vacuum emission spectrometer for the analysis of ferrous and non ferrous alloys to a maximum of 30 elements. Spectral range of 170 to 600 nm.
240 prealligned exit slits
Vacuum emission spectrometer for the analysis of ferrous and non ferrous alloys
Up to 60 elements
Spectral field 170-410 nm, 230-600 nm, 120-410 nm according to the analytical requirements
240 prealligned exit slits
Models 75/80J and 75/80 U upgraded with an external mobile arm with pistol and double spark source arc/spark
This instrument combines the characteristics of both laboratory and sorting (PMI) models
Emission spectrometer for the analysis of non ferrous alloys within the 230-600 nm spectral range, which is suitable for all non-ferrous applications.
Bench spectrometer for analysis of ferrous and non ferrous metals.
SAFE, RELIABLE, ACCURATE
The new rules of the international market require a more and more real necessity of effecting rapid and precise controls to certificate the quality of the products.
F20 is the right instrument, which combines ease of using, reliability and accuracy in result.
F20 represents the ideal solution to be used in any working place:
OFFICE – LABORATORY – STOCK – PRODUCTION.
The new software assures the respect of all quality procedures.
F20 analyses metals belonging to the following bases:
Iron, Nickel, Aluminium, Copper, Lead, Zinc.
Mobil on site spectrometer for sorting grade identification (PMI) of finished or unfinished, ferrous and non ferrous products.
Available with arc and/or spark source in argon gas atmosphere.
Focal length 500 mm
Thanks to its reduced dimensions and weight, can be easily carried out and transported for on site analysis also by suppliers, for sorting and industrial controls.
The traditional optical system assures top analytical performances.
Focal length 750 mm
It is the right instrument for on site using.
Both systems can be automated for production line.
Weight: less than 45 Kgs